My custom mask business

Give my page a like please and check out some of my work

https://www.facebook.com/PiranahaCustomMaskDesigns

FUCK!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! i hate being late for work, and being told to take the day off. money wasted!

One of my babies. This is an ICS XCP with mapul stock, custom stippled pistol grip, stippled areas on the mag for easier grip, Madbull Noveske 10inch front (bitch to put on the ICS by the way) flip up sight front iron sight and a cheap noveske sound hog to mix things up a little.

Went to a game of airsoft not long ago with my boss's airsoft team, it was in Battlefield sports outdoor area called bootcamp.

As per usual I can be seen wearing my "ghost" mask. Even for a publicity picture I couldn't remove it haha.

Again another picture of the guys who where at the site, my boss is the guy that's pretending to hump the fella in the center. And again thats me in the ghost mask chilling in the back drop 

Personally I had a decent time when I went, the outdoor area is basically just as basic as you get in real life, no fake made up bunkers, pillboxes houses or anything thats man made, which makes it harder to hide etc. for me Im more of a cqb player, and found it hard to be quite and not make noise while in the bushes and muck.
They keep it really relaxed and try to have fun when they play, some place's I have been to are too in your face but this place is good in the way its relaxed. 

All in all it wasn't too bad and I can safely say I would go again

Here is a link to the website of battlefield sports

http://www.battlefieldsportsni.com/

And the facebook page for battlefield sports

https://www.facebook.com/pages/Battlefieldsports/336209839329?ref=ts&fref=ts

Some images from the shop I work in:

A&M Airsoft in Northern Ireland Newtownards, Co.Down 13A Francis Street 

A little cluttered, but lots of stuff to play with

Rails, optics, accessories, stocks, masks, helmets and battery chargers anyone?

Oh yea!!!!!!!! plenty of rifles and pistols

A spot of two toning for a younger airsoft player :) keep to the rules guys and airsoft wont be ruined for everyone.

Shit the bed!!!!!

I want this gun, salient arms glock!

This is what a custom gun looks like.

I have a hard on for this gun, stippled lower for easier grip, trust me it helps more than the craptastic stippling on the normal glocks and look at that slide, its an absolute beauty, somebody please but me this :)

These guys have a website http://www.salientarmsinternational.com/ thought its currently under construction but they are also on facebook https://www.facebook.com/SalientArmsInternational

The shop I work for in Northern Ireland. Go check it out on facebook and hit that like button!!!!! 

https://www.facebook.com/AMAirsoft?ref=ts&fref=ts

We sell everything and anything to do with airsoft.

By far the cheapest in Northern Ireland but that doesn't mean quality is thrown out the window, we sell the best quality stuff we can for the cheapest prices.

 

The new Kriss vector!!!


http://kwausa.com/products/smg/kriss-vector/

Here are some specifics :

The KRISS Vector is a weapon designed for the 21st century and has revolutionized the firearm industry. Manufacturing of the KRISS Vector began in 2006 by world renowned KRISS Arms. French engineer Renaud Kerbrat designed the action of the KRISS Super V System that redirects the bolt off-axis into a recess cavity behind the magazine well in the weapon. This effectively reduces felt recoil and muzzle climb. The KRISS Super V System allows for superior control and quick follow up shots when engaging multiple targets.
The KRISS Vector by KWA was developed in conjunction with KRISS Arms to produce an accurate training platform. It utilizes a high impact polymer on the receiver and folding stock to help reduce weight while maintaining durability and strength. All the weapon mechanics of the KRISS Vector have been transferred over and replicated in its airsoft counterpart. Realistic charging handle and functional bolt catch trains the operator proper weapon manipulation with the Kriss platform. It is capable of firing not only in both semi and full automatic modes, but also in a quick two round burst. Other features include a folding adjustable stock, flip-up front and rear sights, and threaded barrel. Utilizing both the KRISS Super V System and the KWA Force Velocity engine, the KRISS Vector by KWA provides the most realistic training experience without compromising performance.

KWA KRISS Vector Airsoft Gas Blowback Submachine Gun
Specifications:
- Velocity: 350 FPS (0.2 g BB) / Range 170-180 Feet
- Barrel Length: 6 inches / 15.2 cm
- Magazine Capacity: 24 Rounds
Features:
- Realistic Construction & Field Stripping
- Fiber reinforced polymer upper and lower receiver
- Aluminum alloy inner frame
- Closed Bolt, simulated KRISS Super V System delayed-blowback
- Adjustable front and rear folding sights
- Side Folding stock
- Accessory rails
- Semi, 2 round burst, and full auto selective fire
- Adjustable hop-up



SOOOOOO who has one of these? I want to know the details god bad and ugly about this gun that had been so hyped up its beyond a joke.

Check out these guys, this picture cracks me up every time I see it, just look at how cool the guy holding the bottle is. MADDDD BASTARD!!!

My god I am bored as fuck!!!!! Honestly I havent a clue why I am even making this blog up, I guess its becuase im bored and have nothing better to do with my life, or that all the friends I have made in the last 24 years of my life have fucked off and became dicks.

I dont know but with that in mind lets talk custom guns, what do you consider custom?

I have heard from some jack-asses that they consider a change or the iron sights custom, I can see their point a little. Though when I think custom, I think design my own rail system, to a degree I'm not made of money ffs. I cant physically CNC new ones but I can but a front section and add rails, add interesting parts to it to make it an actual custom.

A custom gun of mine entails, new rails, built in tracer silencer, angled fore grip, flip up sights, stippled hand guard, new stock.

This is just exterior at the moment...
Interior I plan on having an upgraded hop unit, and precision barrel.
high speed set up, tho not too high the tracer unit wont function if it is, high speed motor.

The motor only a tornado F2 will do, if you like high speed and dont want to change the geabox, get a tornado into your gun, you will not be disappointing....now some ball bag in Bangor that is bald and a knob end that doesn't know how to put one in a CYMA m4, wahhhhh your supposed to be a gun tech? stupid ass fucking dick! Plus your high speed set put shits the bed all the time..... you must be a great gun tech, hows the MP5?? lol

Im glad you barely touched any of my guns. I will leave that for all the children that play at the site you work for, and on another point airsoft is illegal for anyone under 12, are you kidding me, 6 year olds play it at that site and the place is still open WTF police you need to get your act together.

That little rant over, time to show some pretty pics.

May as well post some pics of the project gun I'm making, if anyone reads this please I would like some input :) remember anything that I am making in terms of custom will be resprayed etc so it matches the guns colour 

The new project is the bottom picture, Its basically all layed out, just so I can see how I like the look of things and in all honesty its not much bigger than my all round indoor and outdoor gun.

Playing around with sight configuration here, didnt like the iron sights at the rear as they are not flip up or down lol and it kinda reminded me and a friend that the gun looks like a long cxp.....no thanks I do not want that

So removed the iron sights at the rear, personally makes a huge difference but I now need to get a rear magpul flip up sight. no biggie, I work in a proper airsoft place :p

Testing out where exactly I want the rails put because I want them to be in the best areas but also be out of my way in term of comfort when i need to hold the rifle

Didnt like this configuration the first one looked a lot better in mind with what i want for the rails and general looks 

Another random pic I may have drilled the holes on the frame in this picture, I dont honesty know but what I can say is im blessed with the fact I know what a Drill Tap is and how to use one, this has saved me a whole lot

Here she is with a PEQ box on the top,I kinda like it to be honest it makes it look more modern and adds a different look that the flip sights don't. anyway this is the end of this post, peach out bitches!!!!!!!!!!!!!

Some pretty pics of my gear or at least a small portion of my gear, check it out I got a http://www.redwolfairsoft.com/ patch for my vest too :)

Hope I aint breaking any rules by link redwolf airsoft, ah well fuck it im sure it will get pulled off If I am.

My trusty Tokyo Marui, its not really even marui anymore, gearbox is custom high speed and every other part is custom apart from the body itself

sty Tokyo Marui, its not really even marui anymore, gearbox is custom high speed and every other part is custom apart from the body itself

sty Tokyo Marui, its not really even marui anymore, gearbox is custom high speed and every other part is custom apart from the body itself

sty Tokyo Marui, its not really even marui anymore, gearbox is custom high speed and every other part is custom apart from the body itself

sty Tokyo Marui, its not really even marui anymore, gearbox is custom high speed and every other part is custom apart from the body itself

sty Tokyo Marui, its not really even marui anymore, gearbox is custom high speed and every other part is custom apart from the body itself

Here are a few more guns I have made custom by adding exterior accessories to, I'm happy with them as the guys who have them now haven't complained and really like them.

That makes my job a whole lot better when the customer is pleased.

G&G combat machine with madbul stock rear, 12inch front and integrated silencer with flip up magpul sights yummy :)

Mr Flo's gun, technically didnt do much to this as the owner already had the rails etc on it but I did have to re-do the rail system as it was fitted properly and came of during a game.

King Arms Sig Sauer, fitted a M16 stock to it, makes it a little funkier than the original design and the owner can now run larger batteries that will last longer than a minute.

Another G&G combat machine, this one has the same flip up magpul sights, magpul AFG (angled fore-grip) and the magpul stock, this one alo has the integrated silencer and a T2 aimpoint for fast aiming etc etc monkey nuts in your face :P dont ask because I dont know...

I make custom guns and do repairs when im working in A&M airsoft in Newtownards Northern Ireland.

Heres some of the stuff I have done and I'm proud to say I made these.

First up is what we call the "Black Widow" reason being its small and packs a deadly punch :)

Black Widow

Black Widow

Black Widow

Black Widow 

Why do I call my blog Ghosts blog, because I like to wear a mask the same as Ghosts in Call of Duty Modern warfare when I play airsoft.

I also feel like a fucking ghost, I have had to try and make arrangements for my OWN birthday party for the past 6 years and not one of my so called friends have came out, best friends... I had three of them names will stay unknown for a while, not one of them has come to a party of mine, well what have you done for them? I hear you ask, now I'v been to everything they have organized, been to different countries to see them been to their 18,19,20, 21st birthdays, keep them secret and lied to them so that the party remains a secret. Been their for them when their fiance has broken their heart, made them feel like an absolute piece of shit........... but they cant take one day out of their busy fucking lives for a friend, cheers lads :)

Friendship means a lot to me, I have never been a big hit with the ladies so it was always down to me being with friends and chatting with them to keep me from going insane, or creating a blog... well now the blogs happened ah well shit happens, your all dicks!!!!

Ghost form call of duty all rights to the guys who created him :)

Me and a team mate at an airsoft site called SG1 in Northern Ireland

The logo I hand designed and made for the airsoft team I am in Combat Elite

(this is copyrighted so if your caught using it, good luck :)

What the hell do I write on this thing?

Fuck it, heres a Bio

Scott Dickson

Northern Ireland

24

single

live at home with mother and father, I know you dont need to tell me how sad my life sounds, wait theirs more.

Since I can remember I have always loved guns, police, army and anything in between.

I work part time in an airsoft shop In the town adjacent my own, I play airsoft, live airsoft, think airsoft, basically everything I do is something to do with airsoft.

Q: Why did I create this thing?
A: Not really sure, pissed off with the world, friends and family, I want to voice my opinion for once, and show off some of my airsoft stuff :)

Why does the good guy always finish last? why does he never get anything, why does he never get the woman, why does he never win, why does he always....always get fucked over by friends (you know exactly who you are, if you think it may be you, and your having a little doubt in your mind, then its you)

I was always brought up to be courteous and nice to people and I even won awards for "being nice" in school.
If somebody calls you a cock sucker "be nice"
If somebody "hates on you" be nice!
If somebody bad mouths you to the world....guess what "be nice"

Well dad "being nice" has got me nowhere, so I ain't going to "be nice" anymore and I certainly will not hold back my opinion, right or wrong.

This blog will not be for the faint hearted, if you are disappear.
If you dont like to hear the truth and accept it disappear.
If your a fucking asshole, guess what??????? disappear :)


On to Airsoft:

Play on a team called Combat Elite, have been on the team for just over a year, used to be a marshal at a place in my home town, this is where more anger come's out.

MARSHAL:
somebody who watches over games and makes them up for people to enjoy their experience.

At the beginning I marshaling for free, then I got the odd "loyalty" for the owner, got to the point that I was being treated like an employee but not being paid to act as one, for example:

 . not coming in, I get shouted at
 . expected to clean
 . not given time to play in the site for free....
 . then a proper register or till came in I along with other marshals had watch      over money. And accept responsibility of the money....

I was promised a £400 "retail" airsoft gun from the owner for my hard work and services over a busy amount of time, months later nothing still, patience is being tested at this point, then I ask the owners brother if im ever going to get the gun, I even said I would settle for something of less value because I didn't believe I would actually get a thing for the work I had done.
He told me he didn't think his brother was going to produce the goods, anyway I said I would take a £160 gun if it was definite that I would get something as a thank you. He said he was going to talk to his brother, a week later I got the £160 gun. The owners brother said to me to remember to txt the owner and say thank you, naturally I was going to anyway and I txt him.

ME
Hi C*&*@£, thanks for the cxp
BOSS
No problem

A few days later after continued bullshit at marshaling I had it set in my head I was going to leave, I just didn't know when, and If the gun I had received actually covered what I was owed for services rendered.

Well I ended up leaving not long after that day I decided I was going to leave, I left and hell did I receive a shit load of crap from people txting me saying why have I left, to people calling me a thief!!!!! and why where people calling me that?
Well people where calling me a thief because the guy that owns the site had plastered FACEBOOK saying that I was a thieving bastard and that I had stolen the gun that I received for services rendered.. hahaha the cheek of the bastard.

Needless to say I couldn't understand it, but I did not give the gun back as it was rightfully mine, and I had already customized it and he wasn't getting a custom gun back. Simple!

I then recieved a message with a screenshot from facebook that said he was going to come round my door and get the gun back the hard way or the easy way, a threat in my eyes, and I dont take threats...I will remember that!
And that I was a two-faced judas bastard and some other crap I dont care to remember.

Not long after, I found out that the marshals never had any insurance to be their, so we would have been sued and not the owner.
We also never had anyone health and safety trained
And no checks where done by police to make sure that any of the staff were not dodgey or rapists or Phedophiles.

I'm none of the above so I had nothing to worry about on those, but I did not have insurance and I had no heath and safety training.... thats never a good thing, especially as the so called head marshal.

Some may say I'm bitter about the situation but I honestly dont care, I personally feel the right to be on this occasion. 

Now I work In an awesome airsoft shop in the town beside mine, getting paid, getting loyalties, and enjoying life. The shop is doing well, and the boss is a great guy.

Plus he is an actual airsofter so he has a passion for the sport.

Dont worry anyone that reads my blog, it will not be all doom and gloom :)

Peace out